Forholdsregler for installation af varmesmelteslange og hot melt limpistol

Varmesmelteslange oghot melt limpistol are indispensable parts of the entire hot melt glue machine spray system. The hot melt hose is used for heat preservation and heating to transport liquid hot melt glue, and the hot melt limpistol is used for heating and spraying hot melt glue. The main machine, hot melt hose, and hot melt limpistol have heating functions. The temperature is relatively high, so you must pay attention to safety during the use of the device.

1. Når du installerer smelteslangen, skal trykværdien af ​​trykreguleringsventilen justeres til nul.

 

 2. When moving the hot melt limpistol, the nozzle must be protected.

 

3. Connect the hot melt limpistol to the hot melt hose, and then turn on the power after connecting the hot melt hose to the host of the hot melt glue machine. (Pay attention to the alignment of the screws when connecting to prevent slippage)

 

4. Magnetventilen er tæt på dysens orientering for at forhindre forlænget skiftetid.

 

5. Varmesmelteslangen kan hænges op under brug for at forhindre bevægelse og slid på jorden. Især manuelle smeltelimemaskiner er grundlæggende ophængt, hvilket ikke kun beskytter smelteslangen, men også sparer kræfter.